M-C12

Two-way passive coaxial monitor

M-C12

Two-way passive coaxial stage monitor

Current
Coaxial design for true point source performance
Signature EM Acoustics passive crossover for unprecedented frequency and phase response
12″/1.3″ neodymium coaxial drive unit
M-C12
The M-C12 is the smaller of two new coaxial stage monitors from EM Acoustics – a compact two-way design intended to satisfy the most demanding artist. The M-C12, and the larger companion M-C15 – are intended not only to be world-class stage monitors, but also to suit today’s rental market by being genuine multi-purpose loudspeakers.
  • Features allow use both as a stage monitor but also a powerful FOH or installation product
  • 60°H x 40°V constant directivity waveguide
  • Premium 15mm multi-laminate birch plywood enclosure
  • Black or white textured paint finish
  • Optional weather protection or RAL custom colours
  • 35mm polemount (hidden inside handle) and four M8 threaded rigging points
  • Hex punched steel grille backed with acoustically transparent black fabric

The low profile enclosure contains a 12” (305mm) neodymium LF drive unit with a coaxial 1.4” (36mm) exit HF compression drive unit, linked via the internal passive crossover network. Both the LF and HF drive units share the same magnet assembly, reducing overall weight and enclosure profile – making the M-C12 one of the lowest profile 12” stage monitors on the market today at only 316mm (12.4”) tall. The HF drive unit is coupled to a bespoke constant-directivity waveguide, which produces a 40°H x 60°V dispersion pattern on stage.

The robust enclosure is constructed from premium multi-laminate Birch plywood and is finished in impact resistant textured paint. The enclosure contains a pair of M8 threaded mounting points in each end for attaching the optional flying hardware, and a 35mm polemount is hidden discreetly inside one of the handles to allow stand mounting. When used in this way as a powerful front of house loudspeaker, the waveguide produces a 60°H x 40°V coverage pattern.

The M-C12 is finished in a rugged black textured polyurethane as standard, though RAL colour matching and weather protected outdoor options are available. The front of the loudspeaker is protected by a rigid 2mm steel grille backed with acoustically transparent fabric and supported by steel braces for additional strength. Two flush handles and protective floor skids complete the hardware package, and a single NL4 connector is provided on each end within a sculpted recess for discreet cabling.

The M-C12 requires a single amplifier channel, and should be used with professional power amplifiers capable of delivering 750-1000W RMS into an 8-ohm load. For optimum results, the EM Acoustics DQ10 or DQ20 Advanced System Amplifiers, or the AQ Series power amplifiers in conjunction with the DSC48 system controller (for loudspeaker protection) should be used.

Enclosure Type Two-way coaxial passive, reflex loaded
Components Coaxial 12” (305mm) LF/1.4” (36mm) exit HF with bespoke waveguide
Dimensions (HxWxD), mm/(ins) 313 (12.3) x 500 (19.7) x 418 (16.5) mm/(ins)
Net/Shipping Weight 21/22.3kg (46.2/49lbs)
Frequency Response 65Hz – 20kHz +/- 3dB
Nominal Dispersion 40H x 60V (monitor orientation, -6dB points) 60H x 40V (FOH orientation, -6dB points)
Maximum SPL 128dB continuous, 134dB peak
Loudspeakers per amplifier DQ6: 2 per channel, DQ10: 4 per channel, DQ20: 4 per channel
Power Handling 400W RMS, 800W program
Nominal Impedance 8 ohms passive

Applications

Case Studies using this Product

Case Studies using this Product