The enclosure contains a 10” (254mm) neodymium LF drive unit, linked via the internal passive crossover network to a 1.7” (44mm) diaphragm, 1” (25mm) exit HF compression drive unit. The HF drive unit is coupled to a constant directivity waveguide, which produces a 80°H x 60°V dispersion pattern. This wider dispersion pattern allows greater freedom of movement for artists on-stage, where high separation is not necessary. The robust enclosure is constructed from premium multi-laminate Birch plywood and is finished in impact resistant textured paint. The front of the loudspeaker is protected by a rigid steel grille backed with acoustically transparent foam. A pair of flush handles are provided, and two NL4 connections are provided on a recessed panel on the rear of the monitor for input and enclosure link. The enclosure is finished in a rugged black textured polyurethane as standard, though RAL colour matching and weather-protected outdoor options are available.
The M-10 requires a single amplifier channel, and should be used with professional power amplifiers capable of delivering 500-600W RMS into an 8-ohm load. For optimum results, the EM Acoustics DQ10 or DQ20 Advanced System Amplifiers, or the AQ-10 Series power amplifiers in conjunction with the DSC48 system controller (for loudspeaker protection) should be used.
|Enclosure Type||Two-way passive floor monitor|
|Components||1 x 10″ (254mm) neodymium LF drive unit
1 x 1″ (25mm) exit neodymium HF drive unit
|Dimensions (HxWxD), mm/(ins)||297 (11.7) x 560 (22) x 400 (15.7)|
|Net/Shipping Weight||17/19kg (37.4/41.8lbs)|
|Frequency Response||70Hz – 20kHz ± 3dB|
|Nominal Dispersion||80°H x 60°V (-6dB points)|
|Maximum SPL||122dB continuous, 128dB peak|
|Loudspeakers per amplifier||DQ6: 2 per channel, DQ10: 4 per channel, DQ20: 4 per channel|
|Power Handling||300W RMS, 600W program|
|Nominal Impedance||8 ohms|