M-10

Two-way passive monitor

M-10

Two-way compact passive stage monitor

Astonishing LF performance for enclosure size

Signature EM Acoustics passive crossover for unprecedented frequency and phase response

10" neodymium LF drive unit, 1" exit neodymium HF drive unit

The M-10 is a compact two-way passive stage monitor, intended for lower-SPL applications where accurate artist reference and reasonable LF extension are still required from a very compact enclosure. The M-10 is completely passive, yet outperforms many bi-amplified or DSP-processed designs.

  • Precise, predictable HF coverage pattern
  • 80°H x 60°V constant directivity waveguide
  • Premium 15mm multi-laminate birch plywood enclosure
  • Black or white textured paint finish
  • Optional weather protection or RAL custom colours
  • Hex punched steel grille backed with acoustically transparent foam

The enclosure contains a 10” (254mm) neodymium LF drive unit, linked via the internal passive crossover network to a 1.7” (44mm) diaphragm, 1” (25mm) exit HF compression drive unit. The HF drive unit is coupled to a constant-directivity waveguide, which produces a 80°H x 60°V dispersion pattern. This wider dispersion pattern allows greater freedom of movement for artists on-stage, where high separation is not necessary. The robust enclosure is constructed from premium multi-laminate Birch plywood and is finished in impact resistant textured paint. The front of the loudspeaker is protected by a rigid steel grille backed with acoustically transparent foam. A pair of flush handles are provided, and two NL4 connections are provided on a recessed panel on the rear of the monitor for input and enclosure link. The M-10 is supplied in black as standard, however RAL colour matching and weather protection options are also available if required.

The M-10 requires a single amplifier channel, and should be used with professional power amplifiers capable of delivering 500-600W RMS into an 8-ohm load. For optimum results, the EM Acoustics DQ10 or DQ20 Advanced System Amplifiers, or the AQ-10 Series power amplifiers in conjunction with the DSC48 system controller (for loudspeaker protection) should be used.

Enclosure TypeTwo-way passive floor monitor
Components1 x 10" (254mm) neodymium LF drive unit
1 x 1" (25mm) exit neodymium HF drive unit
Dimensions (HxWxD), mm/(ins)

297 (11.7) x 560 (22) x 400 (15.7)

Net/Shipping Weight17/19kg (37.4/41.8lbs)
Frequency Response70Hz - 20kHz ± 3dB
Nominal Dispersion80°H x 60°V (-6dB points)
Maximum SPL122dB continuous, 128dB peak
Power Handling300W RMS, 600W program
Nominal Impedance8 ohms

No items matched your criteria